WHAT YOU SHOULD KNOW

Only new at TopMarine
Simply put, buying a remanufactured drive is risky. Common practices in the industry include reusing critical wear parts such as cases, gears, shafts and bearings. Inspecting these parts to determine a reasonable expected remaining life is nearly impossible. Consequently, premature failures are common. Why risk relying on used and possibly worn out parts when you can buy a brand new drive from TopMarine for less money?

TopMarine sales for the largest supplier of aftermarket sterndrives and our own line of outboards in the world. The company makes replacement sterndrives for MerCruiser's® Alpha One® and Gen II stern drives and replacement outboard lower units for Mercury®, Johnson/Evinrude® and Yamaha®. The Outdrives are not remanufactured, they are entirely new. The drives are made of parts that are completely compatible and interchangeable with the OEM. The drives are assembled in North America.

The drives come standard with a three-year, fault-free warranty. This means that the unit is covered for any failure that requires the drive to be repaired or replaced. Run it without lubrication, crash into a stump, suck up some fishing line, it does not matter, the drive is always covered. We believe this warranty is one of the best warranties ever offered for astern drive or a outboard lower unit. Peace of mind while on the water is important, and we go the extra distance to make sure that our products perform.

Our supplier perform extensive endurance testing on our parts including the gears, shafts, bearings, and other wear parts to confirm performance and durability. 

TopMarine has the best prices by far for replacement drives compatible with MerCruiser's® Alpha One®, Gen II, Mercury®, Johnson/Evinrude® and Yamaha®. Often the company is asked 'How do we do it?'. 

TopMarine buys its parts directly from manufacturers and passes the savings on to the customer. The marine industry is notorious for multiple layers of distribution which adds cost to the end user. By avoiding the middleman, TOPMARINE is able to offer a quality drives at a fraction of the price offered by others.

TopMarine also offers a complete line of hydraulic parts compatible with MerCruiser® Sterndrives. The products offered include hydraulic pumps, trim cylinders, hoses, fittings, and other accessories. TOPMARINE also offers a simble housing repair kit.

Remanufactured Engines

Seadoo Watercraft Engines

Top Marine  sales for the large supplier of remanufactured Seadoo watercraft engines, in fact, the largest supplier of remanufactured Seadoo watercraft engines in the world. Each remanufactured Seadoo watercraft engine undergoes the same rigorous process of remanufacturing. The used pistons, rings, rods, bearings, gaskets and oil seals in the oil Seadoo engine are discarded. New parts are used exclusively in the reassembly of the rebuilt Seadoo engine. Only the block of the used Seadoo watercraft engine is reused. Each remanufactured Seadoo watercraft engine comes with either a one year or two year fault-free warranty. The fault-free warranty means that Our supplier will cover the Seadoo watercraft engine regardless of type of failure. The remanufactured Seadoo watercraft engine can be overheated, run out of oil, or detonated and it will still be covered. Our supplier s fault-free warranty of Seadoo engines is the best in the remanufactured Seadoo watercraft engine industry.

Our supplier owns and operates the only private PWC engine research lake in the world—Alligator Point. Alligator Point consist of a 40 acre lake with a stationary dock and living facilities for around the clock testing. Our supplier owns the entire lake and surrounding land so there are no neighbors to bother. Our supplier s parts and engine remanufacturing techniques are tried and proven through endurance and performance testing at the research center.

Our supplier owns two patents for its crankshaft remanufacturing process. The patents are for the tools and fixtures used for phasing and truing press fit crankshafts. Our supplier also utilizes CNC technology for a number of operations, including cutting heads, resurfacing rotary covers, and boring and honing. Our supplier s diamond stone honing technology is state of the art.

Our supplier has the largest inventory of remanufactured PWC engines in the world. Others may say they have it, but Our supplier really does..

Remanufactured Jetski Engine

Top Marine  sales for the  the largest supplier of remanufactured jetski engines in the world. No other supplier of remanufactured jetski engines come close. Our supplier produces over 10,000remanufactured jetski engines per year. Our supplier 's factory for remanufactured jetski engines is over 30,000 square feet. Remanufactured jetski engine for Sea Doo, Yamaha, Polaris, Kawasaki and Tigershark are included in Our supplier 's product line.

Each remanufactured jetski engine undergoes the same process. Used pistons, rings, rods, bearings, gaskets and oil seals are discarded. Our supplier 's remanufactured jetski engine contains all new moving parts. Only the block of the jetski engine is reused.

Our supplier owns two patents for the remanufacturing of press fit crankshafts like the ones used in PWC engines. These patents are for the tools and fixtures used in truing and phasing crankshafts. Our supplier also utilizes CNC technology for a number of processes including resurfacing rotary covers, recutting heads, and boring and honing cylinders. Our supplier 's diamond stone honing technology is state of the art.

Each  remanufactured jetski engine comes with either a one year or two year fault-free warranty. The remanufactured jetski engines are warranted against any type of failure including overheating, lack of oil, detonation and lean seizures.

Our supplier operates the only private PWC engine research lake in the world. Alligator Point, as it is known, consist of a 40 acre lake, a stationary dock and living facilities for around the clock testing. Our supplier owns the entire lake and all of the surrounding land so there are no neighbors to bother. The Research Center is used for both endurance and performance testing of Our supplier 's engine parts and remanufacturing technologies.

Remanufactured Sea Doo Engines

Nobody sells more remanufactured Sea Doo engines than Nobody sells more remanufactured Sea Doo engines than Our supplier. Our supplier is the largest supplier of remanufactured Seadoo engines in the world. Our supplier’s factory for remanufactured Sea Doo engines is over 30,000 square feet. Our supplier has been supplying remanufactured Seadoo engines since 1997. Our supplier was the first company to offer remanufactured Sea Doo engines from an assembly line.

Nobody's inventory of PWC engines comes close to Our supplier. Our supplier has the largest inventory of PWC engines in the world.

Each remanufactured Seadoo engine undergoes the same remanufacturing process. All of the used pistons, rings, rods, bearings, gaskets, and oil seals from the old Sea Doo engine are discarded. The remanufactured Seadoo engine gets all new wear parts. Only the block of the used Seadoo engine is reused. 

Our supplier owns two patents for the remanufacturing of press fit crankshafts like the ones used in PWC engines. The patents cover the tools and fixtures used for phasing and truing crankshafts. Our supplier also owns and operates a number of CNC machines. These technologies and machines can be seen on the factory tour video on this website.

Each remanufactured Sea Doo engine comes with a one year or two year fault free warranty.  This warranty will cover the remanufactured Seadoo engine due to any type of failure including overheating, detonation, water intrusion, and lean seizure. In other words, the remanufactured Seadoo engine is covered for any type of failure, Our supplier’s fault, or the owner’s.

Our supplier owns and operates the only PWC engine research lake in the world. Alligator Point as it is known consist of a 40 acre lake, a stationary dock and living facilities for staff to conduct around the clock testing. Endurance testing and performance testing ensure that Our supplier 's engines meet or exceed OEM requirements.

Our supplier is the largest supplier of remanufactured Seadoo engines in the world. Our supplier’s factory for remanufactured Sea Doo engines is over 30,000 square feet. Our supplier has been supplying remanufactured Seadoo engines since 1997. Our supplier was the first company to offer remanufactured Sea Doo engines from an assembly line.

Each remanufactured Seadoo engine undergoes the same remanufacturing process. All of the used pistons, rings, rods, bearings, gaskets, and oil seals from the old Sea Doo engine are discarded. The remanufactured Seadoo engine gets all new wear parts. Only the block of the used Seadoo engine is reused. 

Our supplier owns two patents for the remanufacturing of press fit crankshafts like the ones used in PWC engines. The patents cover the tools and fixtures used for phasing and truing crankshafts. Our supplier also owns and operates a number of CNC machines. These technologies and machines can be seen on the factory tour video on this website.

Each remanufactured Sea Doo engine comes with a one year or two year fault free warranty.  This warranty will cover the remanufactured Seadoo engine due to any type of failure including overheating, detonation, water intrusion, and lean seizure. In other words, the remanufactured Seadoo engine is covered for any type of failure, Our supplier’s fault, or the owner’s.

Our supplier owns and operates the only PWC engine research lake in the world. Alligator Point as it is known consist of a 40 acre lake, a stationary dock and living facilities for staff to conduct around the clock testing. Endurance testing and performance testing ensure that Our supplier 's engines meet or exceed OEM requirements.

Top Marine  offers a complete line of remanufactured jetski engines including Yamaha jetski engines, Kawasaki jetski engines and Tigershark jetski engines. The Yamaha jetski engines are for the Waverunner brand of personal watercraft made by Yamaha. The Kawasaki jetski engines are for the Jetski brand which is a trade name of Kawasaki. Tigershark jetski engines are for the Tigershark brand. Tigershark jetski engines were produced through 2003, Tigershark is no longer in the jetski business.

Our supplier has been offering jetski engines since 1997. Our supplier is the largest supplier of remanufactured jetski engines in the world. Our supplier operates a factory for remanufactured jetski engines that is over 30,000 square feet.

Our supplier owns two patents for reassembly of press fit crankshafts like the ones in jet ski engines. These patents were invented by Greg Pickren, the owner of Our supplier, and are for the truing and phasing of crankshafts.

Our supplier owns and operates the only PWC engine research facility in the world—Alligator Point. Alligator Point is a 70 acre property with a 40 acre lake totally enclosed within the complex. In other words, we have neighbors on the lake. The facility has a stationary dock and living facilities for around the clock endurance testing of PWC engines. This means that Our supplier 's parts and remanufacturing technologies are tried and proven.

Each remanufactured jetski engine come with either a one year or two year fault free warranty. The remanufactured jetski engine is warranted against any type of failure including overheating, lack of oil, detonation and lean seizures.

Top Marine  offers a complete line of PWC parts. Our supplier is offering of PWC parts includes Polaris pwc parts, Yamaha pwc parts, Tigershark pwc parts, along with some pwc performance parts. Polaris pwc parts include pistons, rings, rods, bearings, oil seals, crankshafts and gaskets. Yamaha pwc parts include pistons, rings, rods, bearings, oil seals, crankshafts, gaskets and pump parts. Tigershark pwc parts include pistons, rings, rods, bearings, oil seals, crankshafts and gaskets.

PWC parts for Polaris, Yamaha and Tigershark can be purchased . You will easily find one stop shopping for Polaris pwc parts, Yamaha pwc parts and Tigershark pwc parts as well as other manufacturers.

Our supplier has remanufactured over 50,000 jet ski engines over the past 10 years. Our supplier is by far the largest remanufacturer of et ski engines in the world. These parts are used in our engines so we know they work.

Top Marine  offers a complete line of jetski parts.  Included in our inventory are Kawasaki jetski parts, jetski performance parts, Seadoo jetski parts, and Polaris jetski parts. Available parts include crankshafts, gaskets, pistons, rings, bearings and oil seals for Kawasaki, Seadoo, and Polaris as well as completely remanufactured engines. Jetski performance parts are also offered for Seadoo jetski, Polaris jetski, and Kawasaki jetski.

Seadoo jetski parts, Kawasaki jetski parts, and Polaris jetski parts can be purchased from Top Marine

Alligator Point is Our supplier own private research lake for performance and endurance testing of PWC engines. The facility is a 70 acre parcel with a 40 acre totally enclosed lake.  On the lake is a stationary dock and living facilities for around the clock testing. This testing ensures Top Marine products are tried and proven.

Our supplier has remanufactured over 50,000 jet ski engines over the past 10 years. Our supplier is by far the largest remanufacturer of jet ski engines in the world. The parts we sell are the same parts we use in our engines so we know they work.

Top Marine  offers a complete line of Seadoo jetski parts for repairing your Rotax engine. The Rotax line is a tradename of Bombardier Corporation which manuafactures Seadoo personal watercrafts.  Included in the sea-doo parts line are rebuilt crankshafts and engines, new gaskets, pistons, rings, bearings, oil seals, starters, rotary valves and pump parts for Seadoo repairs. 

Top Marine sales for the largest remanufacturer of PWC engines in the world. The company also maintains the largest inventory of jet ski engines. Nobody else comes close. Our supplier has remanufactured over 50,000 engines over the past 10 years. Our supplier was the first company to offer production line remanufactured PWC engines. The company was founded in 1997 by Greg Pickren. The mission of op marine is to make owning, operating, and maintaining a PWC more affordable.

Our supplier owns two patents for the reassembly of PWC crankshafts. Our supplier also offers a guaranteed ship date on its remanufactured PWC engines.

Our supplier parts are tested extensively at Alligator Point. Alligator Point is the only private PWC engine testing lake in the world. The complex is 70 acres with a totally enclosed 40 acre lake. The facility has a stationary dock and living facilities for around the clock testing of parts.